|
Orma Machine AIR SYSTEM 25/14
Press hydraulic system, Working Cycle Manual/Automatic. This system has been designed to cover routed panels both with veneer and thermo plastic materials using or not the membrane.
Year of construction 2005
Pin System manual (magnets) Yes (2 tables) 2570mmx1470mm
Membrane Yes
Heating plate dimensions: 2580mmx1470mm
Electric Resistances 220Vx2800 Watts
Max. Size of panel: 2320mmx1220mm
Press Modes: With and without Membrane
Pressure Chambers height: 60 mm
Max thickness of panel: Max. 40mm
Number of press tables: 2 with pin system manual
Number of pressing cylinders: 4
Diameter of press pistons: d=40/25 140 mm
Hydraulic piston pump 1
Operating pressure of
the hydraulic system 240 Bar
Chamber Pressure 1.5-6 Bar
Foil type: 2500mm-PVC, ABS, veneer, HPL
Operating Voltage: 220 V
Control Voltage: 110 V
Frequency 60 Hz
Installed power Supply 20 KW
Current 60 A
Necessary air pressure 6 Bar
Weight of the press Approximately 9700 kg
Size of the line Approximately 8.30 m long
Air Consumption 6 m3/h
Electric Resistances 5
Operating Temperature Max. 150° C
Membrane clamping
with vise grips manual At all four sides of the press
Control Cabinet: KEY BOARD, GE POWER CONTROL
PLC GE FANUC series 90-30
Storage location: Guadalajara /Mexico
For detailed information please contact
Rapha Systems Handels-GmbH
Kai Veeser
Griesperwarth 3-4
3262 Wang, Austria
Mobil +49 151 1633 5390
Phone: +43 7488 711 33
Fax: +43 7488 711 33-12
E-Mail: k.veeser@rapha-systems.at
|
